STM Custom HID 보드로 입력되는 값 4Byte로 수정하기
선언을 TX라고 했지만 실제 in, out은 PC를 기준으로 하기때문에 PC의 out이 보드에서는 in입니다.
#define MAXPCKRXSIZE 0x02
#define MAXPCKTXSIZE 0x04
/* USB Configuration Descriptor */
/* All Descriptors (Configuration, Interface, Endpoint, Class, Vendor */
const uint8_t CustomHID_ConfigDescriptor[CUSTOMHID_SIZ_CONFIG_DESC] =
{
0x09, /* bLength: Configuation Descriptor size */
USB_CONFIGURATION_DESCRIPTOR_TYPE, /* bDescriptorType: Configuration */
CUSTOMHID_SIZ_CONFIG_DESC,
/* wTotalLength: Bytes returned */
0x00,
0x01, /* bNumInterfaces: 1 interface */
0x01, /* bConfigurationValue: Configuration value */
0x00, /* iConfiguration: Index of string descriptor describing
the configuration*/
0xC0, /* bmAttributes: Bus powered */
0x32, /* MaxPower 100 mA: this current is used for detecting Vbus */
/************** Descriptor of Custom HID interface ****************/
/* 09 */
0x09, /* bLength: Interface Descriptor size */
USB_INTERFACE_DESCRIPTOR_TYPE,/* bDescriptorType: Interface descriptor type */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints */
0x03, /* bInterfaceClass: HID */
0x00, /* bInterfaceSubClass : 1=BOOT, 0=no boot */
0x00, /* nInterfaceProtocol : 0=none, 1=keyboard, 2=mouse */
0, /* iInterface: Index of string descriptor */
/******************** Descriptor of Custom HID HID ********************/
/* 18 */
0x09, /* bLength: HID Descriptor size */
HID_DESCRIPTOR_TYPE, /* bDescriptorType: HID */
0x10, /* bcdHID: HID Class Spec release number */
0x01,
0x00, /* bCountryCode: Hardware target country */
0x01, /* bNumDescriptors: Number of HID class descriptors to follow */
0x22, /* bDescriptorType */
CUSTOMHID_SIZ_REPORT_DESC,/* wItemLength: Total length of Report descriptor */
0x00,
/******************** Descriptor of Custom HID endpoints ******************/
/* 27 */
0x07, /* bLength: Endpoint Descriptor size */
USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType: */
0x81, /* bEndpointAddress: Endpoint Address (IN) */
0x03, /* bmAttributes: Interrupt endpoint */
MAXPCKRXSIZE, /* wMaxPacketSize: 2 Bytes max */
0x00,
0x20, /* bInterval: Polling Interval (32 ms) */
/* 34 */
0x07, /* bLength: Endpoint Descriptor size */
USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType: */
/* Endpoint descriptor type */
0x01, /* bEndpointAddress: */
/* Endpoint Address (OUT) */
0x03, /* bmAttributes: Interrupt endpoint */
MAXPCKTXSIZE, /* wMaxPacketSize: 4 Bytes max */
0x00,
0x20, /* bInterval: Polling Interval (20 ms) */
/* 41 */
}
const uint8_t CustomHID_ReportDescriptor[CUSTOMHID_SIZ_REPORT_DESC] =
{
0x05, 0x8c, /* USAGE_PAGE (ST Page) */
0x09, 0x01, /* USAGE (Demo Kit) */
0xa1, 0x01, /* COLLECTION (Application) */
/* 6 */
/* Led 1 */
0x85, 0x01, /* REPORT_ID (1) */
0x09, 0x01, /* USAGE (LED 1) */
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
0x25, 0x02, /* LOGICAL_MAXIMUM (1) */
0x75, 0x08, /* REPORT_SIZE (8) */
0x95, (MAXPCKTXSIZE -1), /* REPORT_COUNT (3) */
0xB1, 0x82, /* FEATURE (Data,Var,Abs,Vol) */
0x85, 0x01, /* REPORT_ID (1) */
0x09, 0x01, /* USAGE (LED 1) */
0x91, 0x82, /* OUTPUT (Data,Var,Abs,Vol) */
/* 26 */
/* Led 2 */
0x85, 0x02, /* REPORT_ID 2 */
0x09, 0x02, /* USAGE (LED 2) */
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
0x75, 0x08, /* REPORT_SIZE (8) */
0x95, (MAXPCKTXSIZE -1), /* REPORT_COUNT (1) */
0xB1, 0x82, /* FEATURE (Data,Var,Abs,Vol) */
0x85, 0x02, /* REPORT_ID (2) */
0x09, 0x02, /* USAGE (LED 2) */
0x91, 0x82, /* OUTPUT (Data,Var,Abs,Vol) */
/* 46 */
/* Led 3 */
0x85, 0x03, /* REPORT_ID (3) */
0x09, 0x03, /* USAGE (LED 3) */
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
0x75, 0x08, /* REPORT_SIZE (8) */
0x95, (MAXPCKTXSIZE -1), /* REPORT_COUNT (3) */
0xB1, 0x82, /* FEATURE (Data,Var,Abs,Vol) */
0x85, 0x03, /* REPORT_ID (3) */
0x09, 0x03, /* USAGE (LED 3) */
0x91, 0x82, /* OUTPUT (Data,Var,Abs,Vol) */
/* 66 */
/* Led 4 */
0x85, 0x04, /* REPORT_ID 4) */
0x09, 0x04, /* USAGE (LED 4) */
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
0x75, 0x08, /* REPORT_SIZE (8) */
0x95, (MAXPCKTXSIZE -1), /* REPORT_COUNT (3) */
0xB1, 0x82, /* FEATURE (Data,Var,Abs,Vol) */
0x85, 0x04, /* REPORT_ID (4) */
0x09, 0x04, /* USAGE (LED 4) */
0x91, 0x82, /* OUTPUT (Data,Var,Abs,Vol) */
/* 86 */
/* key Push Button */
0x85, 0x05, /* REPORT_ID (5) */
0x09, 0x05, /* USAGE (Push Button) */
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
0x75, 0x01, /* REPORT_SIZE (1) */
0x81, 0x82, /* INPUT (Data,Var,Abs,Vol) */
0x09, 0x05, /* USAGE (Push Button) */
0x75, 0x01, /* REPORT_SIZE (1) */
0xb1, 0x82, /* FEATURE (Data,Var,Abs,Vol) */
0x75, 0x07, /* REPORT_SIZE (7) */
0x81, 0x83, /* INPUT (Cnst,Var,Abs,Vol) */
0x85, 0x05, /* REPORT_ID (5) */
0x75, 0x07, /* REPORT_SIZE (7) */
0xb1, 0x83, /* FEATURE (Cnst,Var,Abs,Vol) */
/* 114 */
/* Tamper Push Button */
0x85, 0x06, /* REPORT_ID (6) */
0x09, 0x06, /* USAGE (Tamper Push Button) */
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
0x75, 0x01, /* REPORT_SIZE (1) */
0x81, 0x82, /* INPUT (Data,Var,Abs,Vol) */
0x09, 0x06, /* USAGE (Tamper Push Button) */
0x75, 0x01, /* REPORT_SIZE (1) */
0xb1, 0x82, /* FEATURE (Data,Var,Abs,Vol) */
0x75, 0x07, /* REPORT_SIZE (7) */
0x81, 0x83, /* INPUT (Cnst,Var,Abs,Vol) */
0x85, 0x06, /* REPORT_ID (6) */
0x75, 0x07, /* REPORT_SIZE (7) */
0xb1, 0x83, /* FEATURE (Cnst,Var,Abs,Vol) */
/* 142 */
/* ADC IN */
0x85, 0x07, /* REPORT_ID (7) */
0x09, 0x07, /* USAGE (ADC IN) */
0x15, 0x00, /* LOGICAL_MINIMUM (0) */
0x26, 0xff, 0x00, /* LOGICAL_MAXIMUM (255) */
0x75, 0x08, /* REPORT_SIZE (8) */
0x81, 0x82, /* INPUT (Data,Var,Abs,Vol) */
0x85, 0x07, /* REPORT_ID (7) */
0x09, 0x07, /* USAGE (ADC in) */
0xb1, 0x82, /* FEATURE (Data,Var,Abs,Vol) */
/* 161 */
0xc0 /* END_COLLECTION */
}; /* CustomHID_ReportDescriptor */
void CustomHID_Reset(void)
{
/* Set Joystick_DEVICE as not configured */
pInformation->Current_Configuration = 0;
pInformation->Current_Interface = 0;/*the default Interface*/
/* Current Feature initialization */
pInformation->Current_Feature = CustomHID_ConfigDescriptor[7];
SetBTABLE(BTABLE_ADDRESS);
/* Initialize Endpoint 0 */
SetEPType(ENDP0, EP_CONTROL);
SetEPTxStatus(ENDP0, EP_TX_STALL);
SetEPRxAddr(ENDP0, ENDP0_RXADDR);
SetEPTxAddr(ENDP0, ENDP0_TXADDR);
Clear_Status_Out(ENDP0);
SetEPRxCount(ENDP0, Device_Property.MaxPacketSize);
SetEPRxValid(ENDP0);
/* Initialize Endpoint 1 */
SetEPType(ENDP1, EP_INTERRUPT);
SetEPTxAddr(ENDP1, ENDP1_TXADDR);
SetEPRxAddr(ENDP1, ENDP1_RXADDR);
SetEPTxCount(ENDP1, MAXPCKRXSIZE);
SetEPRxCount(ENDP1, MAXPCKTXSIZE);
SetEPRxStatus(ENDP1, EP_RX_VALID);
SetEPTxStatus(ENDP1, EP_TX_NAK);
bDeviceState = ATTACHED;
/* Set this device to response on default address */
SetDeviceAddress(0);
}
'초보의 아웅다웅 설계하기 > STM32' 카테고리의 다른 글
| STM Cube 예제에서 USB Device MSC에서 저장공간을 RAM으로 잡고 사용하기 (0) | 2019.07.27 |
|---|---|
| CKS32F103 => STM의 카피캣을 만나다. (0) | 2019.07.08 |
| J-Link를 사용하여 MCU내 라이팅되어 있는 메모리 확인하기 (0) | 2019.06.28 |
| ST의 디자인 툴 (0) | 2019.06.04 |
| STM32L4 UART/LPUART LL_DRIVER (0) | 2019.05.25 |